Toner copy of image to transfer
- Trim your copy to fit the tote bag. Squeeze a dollop of Mod Podge Transfer Medium onto the top (printed side) of the image. Apply a thick layer over the image. (1/16 thick)
- Slip a piece of wax paper in between the layers of the tote. Position image (wet side down) on the center of the tote. Allow to dry 24 hours.
- After 24 hours, wet the image with a damp sponge and let it soak for 2 min. Working in a circular motion, rub away the paper. The image magically stays! 4. Apply gems and felt hearts with gem glue.