How should I prepare my surfaces before painting with FolkArt Milk Paint?
Preparation depends on the surface. Read more to learn how to prepare unfinished (raw) wood, finished wood, walls, metal, concrete, and masonry.
- Unfinished Wood – FolkArt Milk Paint is best applied directly to unfinished, raw wood. T Sand any rough areas using a medium-to-fine grit sandpaper. Wipe with a tack cloth to remove sanding dust.
- Finished Wood – Finished wood surfaces would include previously painted or varnished surfaces. These surfaces are best cleaned with a household glass cleaner to remove dirt and grease and then brushed with a coat of FolkArt Milk Paint Bonding Primer & Sealer. Allow the primer to thoroughly dry (approximately four hours); then apply FolkArt Milk Paint.
- Walls – Prepare your walls first by cleaning them to remove dust or grease. Clean areas of chipped or peeling paint. Slightly sand the walls to allow for better paint adhesion if walls were previously painted with semi-gloss or gloss finishes.
- Metal – Wash all new metal surfaces in warm soapy water; allow to thoroughly dry. Moisten a paper towel or soft cloth with distilled white vinegar and wipe over surface; allow to dry. Brush on an application of FolkArt Milk Paint Bonding Primer & Sealer. Allow primer to thoroughly dry.
- Concrete and Masonry – Apply a coat of white vinegar (to neutralize lime), allow to dry, rinse, and then allow to dry thoroughly. NOTE: FolkArt Milk Paint is not recommended for concrete areas subject to foot traffic such as a patio. FolkArt Milk Paint decorated concrete and masonry surfaces should be kept as indoor only decorative surfaces.
Add a Comment
You must be logged in to review this item
Click here to login