Desired fabric to recover cushion
Trim if desired
Hot glue gun
2 Yards of natural linen fabric
2 Yards of natural trim
Remove all old fabric from chair.
Clean and sand chair to make sure no chipping paint. Paint entire chair with Gold Metallic Chalk Paint. Let dry.
Sand chair lightly to create a soft distressed finish.
use the fabric that you removed from the chair as a pattern to cut out the new fabric.
using the staple gun attach the new fabric to the chair.
Add the trim with hot glue gun around the back cushion only.
Stencil design onto the center of chair as shown using the Gold Metallic Paint. Let dry.
Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc. disclaims any liability for untoward results.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product.
Copyright: All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper.