Mod Podge Black Light is best applied to a crafted surface in a minimum of 3-4 applications allowing each
coat to thoroughly dry before applying the next. 8.5.7
Mod Podge Glow-in-the-Dark is best applied to a crafted surface in a minimum of three to four even applications allowing each
coat to thoroughly dry before applying the next.
Before pouring resin on canvas, tape the back-side edges with painter’s tape. Pour the resin allowing it to flow over the edge of your canvas.
Coat edges well. Let dry. Once cured, remove the painter’s tape along with all the drips. 8.5.7
If FolkArt® Extreme Glitter starts to streak, allow that
coat to dry to the touch - approximately 20 minutes - then brush another thin
coat in the opposite direction using a soft bristle brush.
The FolkArt Home Decor Crackle is used to create crackled effects with the FolkArt Home Decor Chalk. Directions: Basecoat surface with FolkArt Home Decor Chalk, allow to dry fully. Apply Crackle Medium evenly over surface using a paint brush, being careful not to over stroke...
Squeeze a small amount of Leather Studio™ paint onto a foam plate or disposable palette. Using a soft bristled paintbrush or foam brush, apply paint using long, smooth strokes applied in the same direction; starting along the edges. Work quickly and do not try to get perfect ...
Apply a
coat of Mod Podge® to the inside of the form and allow to dry slightly. Place the Napkin design where desired and gently rub it flat with your thumb. Cover the image with a second very thin
coat of Mod Podge®, beginning in the center and brushing out. Allow to dry...
It's easy to achieve a distressed look with Waverly Inspirations Chalk. Once top
coat of paint has dried, simply sand the surface with sandpaper until the base
coat of paint or the raw surface shows through. When satisfied with the distressed look, wipe project surface with...
Complete puzzle. Next, place puzzle design side-up on non-cling plastic wrap. Brush a medium
coat of Mod Podge Puzzle Saver over the completed puzzle and let dry. Apply a second
coat and allow to dry completely. Once the puzzle has completely dried, flip the sealed puzzle ov...
Although it is not necessary, sealing a completed transferred image project will provide protection. Simply brush on a water-based varnish in the desired finish: matte, satin or gloss. Allow the first
coat to dry then apply a second.