Refer to the chart below to see how much Puzzle Saver is required to save your puzzle. 2 oz = 5 sq. ft. = 720 sq. inch 4 oz = 10 sq. ft. = 1440 sq. inches 8 oz = 20 sq. ft. = 2880 sq. inches 16 oz = 40 sq. ft. = 5760 sq. inches 32 oz = 80 sq. ft. = 11520 sq. inches 64 ...
Yes, we suggest that you wait 72 hours and then wash in a mild soap such as Ivory Snow and line dry. Do not use a heavy detergent or Woolite. Items may be handwashed as well.
Gently roll the bottle of
Mod Podge Black Light on a table prior to using to fully incorporate the product. Applying
Mod Podge Black Light formula is the same as working with any of the other
Mod Podge formulas. It is best brushed smoothly onto your crafting surface using eith...
Gently roll the bottle of
Mod Podge Glow-in-the-Dark on a table prior to using to fully incorporate the product. Applying
Mod Podge Glow-in-the-Dark formula is the same as working with any of the other
Mod Podge formulas. It is best brushed smoothly onto your crafting surface ...
The recommended way to care for a
Mod Podge Silicone Mold is to carefully clean the mold with mild soap and water before and after each use. Then, thoroughly dry the
Mod Podge Silicone Mold before pouring resin into it because any moisture will prevent the resin from curing co...
Wipe down all surfaces while the
Mod Podge Resin mixture is still wet. Use paper towels to clean up measuring cups, mixing cups, and any mixing tool which can be saved and reused on other
Mod Podge Resin projects. 8.5.7
It is best to brush a coat of
Mod Podge onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue; and then press to smooth out any wrinkles or captured air pockets using...
Learn more about this product by reading the
Mod Podge Clear Image Transfer Medium FAQ .
No, shaking may cause bubbles.
Mod Podge Extreme Glitter can be stirred before using to fully incorporate the product.
No, shaking may cause bubbles.
Mod Podge Pearl can be stirred before using to fully incorporate the product.