
			Project Detail
			Project Detail

Bucilla Needle Crafts > Projects

Click image for larger view

'Thrive' Jewelry Set

	Thrive Pendant (item #95399)
	2 Mini Butterfly Charms (item #95447)
	Tulips Red/Blue Charms (item #95454)
	Jump Rings (item #95461)
	Earrings (item #95462)
	Eyepins/ Headpins/ Lobster Clasps (item #95463)
	Beads Small Round (item #95465)
	Twisted Links (item #95466)
	Chunky Loop Chain (item #95473)
	Glass Beads Light Blue (item #95478)
	Glass Beads Blue (item #95482)

Necklace
1. Cut a 15� length of chain.
2. Cut a 10�-13� length of beading wire.
3. String a gold crimp bead onto wire.
4. To create loop at end, feed end of wire back through crimp bead and crush with pliers to secure.
5. String beads in the following order: small brass bead, dark blue bead, small brass bead, light blue bead, and repeat pattern until strand is 7� long.
6. Using same method as above, create loop at the end of strand.
7. Cut two 1� lengths of chain.
8. Use jump rings to attach a 1� length to each end of bead strand.
9. Cut two 1� lengths of chain.
10. Use a jump ring to attach a 1� length and an oval twisted link together.
11. Use a jump ring to attach the previous oval twisted link to the top of the thrive pendant.
12. Feed another jump ring through the top of the thrive pendant and the oval twisted link creating �double jump rings�.
13. Use double jump rings to attach one end of the 15� length to the leftmost bottom hole in the thrive pendant.
14. Use double jump rings to attach other end of the 15� length to an oval twisted link.
15. Use double jump rings to attach a second oval twisted link to the previous oval twisted link.
16. Use double jump rings to attach a third oval twisted link to the second oval twisted link.
17. Use a jump ring to attach the other 1� length to the third oval twisted length.
18. Use jump ring to attach one end of the beaded strand to 15� length, 1� from left end.
19. Use jump ring to attach other end of bead strand to 15� length, 1� from right end.
20. Use jump rings to attach a mini charm (with top hole facing downwards) and a twisted link together.
21. Repeat pattern until there are 6 mini charms and 5 twisted links total.
22. Take eye pin and string a large brass bead onto it.
23. Create loop at end of eye pin.
24. Repeat 3 times.
25. Attach beads to open loops on the middle 4 mini charms.
26. Use jump ring to attach one end of mini charm strand to rightmost hole in bottom of thrive pendant.
27. Use jump ring to attach other end of mini charm strand to the lowest oval twisted loop on necklace.
28. Use jump rings to attach lobster clasp at end of necklace to complete.

Earrings
1. Take head pin and string a blue bead onto it.
2. Create loop about .75� up from bead.
3. Connect the head pin to one end of an eye pin.
4. String tulip charm onto eye pin and create loop.
5. Attach ear wire to end of eye pin.
6. Repeat all steps for other earring.

Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc. disclaims any liability for untoward results.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product.
Copyright: All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper.

Home Craft Categories Brands Articles Store Locator International Locator About Us Contact Plaid
Help Newsletter Idea Submission Independent Retailers Job Opportunities Craft Links Link To Us Privacy Policy Copyright

Project Detail

'Thrive' Jewelry Set