2. Choose a work surface where the runner can sit for the duration of the project. Place the runner with a sheet of wax paper under it on the work surface.

3. Adhere the corner tape pieces to the runner in your desired position. (We made this design in blocks of 4 corners.) Press down on each piece of tape to ensure the edges are firmly against the fabric. If needed, use a ruler to help you center the pieces.

4. Pour a small amount of paint onto a plastic plate or palette, dab the brush into the paint and tap off the excess. You will want a semi-dry brush for this project. For best results, paint in an “up and down” fashion rather then side to side. Paint the entire runner.

5. All the paint to dry and allow to air dry for 24 hours. Heat set with a dry iron and a pressing cloth. Handwash only after 72 hours.