Q: |
|
A: |
1. Pre-wash and dry fabric. This will remove the sizing that comes in new fabric and help the paint bond better with the fibers. more... |
|
Q: |
|
A: |
It is best NOT to thin FolkArt® Fabric™ paints with water as this will dilute the acrylic polymer of the paint and lesson the adhesion properties. Why produce a great piece of artwork to only watch the design weaken or fade with washing?
|
|
Q: |
|
A: |
Yes, all fabrics should be prewashed using soap and water following the manufacturer’s washing instructions, most denim fabrics should be washed multiple times in hot water to thoroughly remove the sizing in the fabric. DO NOT use a liquid fabric softener or a dryer sheet as this may prevent the paints from adhering properly. If your garment is wrinkled, you may iron the fabric as instructed on the garment label, DO NOT use a spray starch product. |
|
Q: |
|
A: |
When applying FolkArt® Fabric™ Brush-on paints to fabric, use a moderately heavy application of paint. It is best to keep your brush full of paint when painting with FolkArt® Fabric™ Brush-on paint, moderate to heavy applications will have greater durability. A lighter application of paint will have less durability.
|
|