Unfinished wood magazine holder sanded smooth
Spray lacquer – satin finish
- With a foam brush, paint Mahogany Stain over entire project, wiping each side as you go. Let dry. Spray with several light coats of Satin Lacquer letting dry in between coats.
- Tape around areas to be painted with chalkboard paint. Apply 3 smooth, even coats of Chalkboard Paint, letting each coat dry before applying next.
- Cure for 24 hours before using chalk. Lightly rub chalk over surface to condition.
Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc. disclaims any liability for untoward results.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product.
Copyright: All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper.