 |
Gallery Glass Direct Horizontal Method - Step 2
Glass Painting
 
- Remove the cap and seal from the Liquid Leading bottle.
Using the metalpick, make a hole in the tip. Be sure the
hole is large enough; small holes will note allow the leading
the flow freely. Replace the cap. Hold the bottle upside
down and tap firmly on a hard surface to force the leading
into the tip. Remove cap.
- Hold the inverted bottle like a broom handle. Don't rest
your elbow on your work surface - it will inhibit your movement.
- As the leading begins to flow, touch it to the surface
where you want to begin the line. As you continue to squeeze,
raise the tip 1" above your work surface to allow the
leading th drape evenly along the pattern line.
- When you approach the end of your pattern line, stop squeezing,
and gently touch the tip of the bottle to the surface to
end the line without creating a blob.
- Allow the leading to dry for at least 8 hours before applying
Window Color™ paints.
Click
here to go to Step 3 of the Direct Horizontal Method.
Back to top
|
|
